刷新页面 加入收藏夹

坚果破壳机设计含SW三维及8张CAD图+说明书

图片展示附件预览 2020-08-19 文件列表浏览 下载 收藏已收藏 报告错误 手机访问 [复制链接]

坚果破壳机设计含SW三维及8张CAD图+说明书

三维总装图

摘要
减轻人工坚果破壳的工作量繁重、人工成本高的麻烦是我此设计的最终目的用破壳机代替人工来节约破壳成本和提高工厂的效益。因为坚果种类繁多,这里我选用榛子来作为研究对象。开发深加工技术,拓宽榛子利用方法是提高榛子商品价值的主要途径,而解决这一问题的前提条件就是对榛子进行去壳。榛子剥壳机的设计是我本次的审计题目,以前人们的剥壳方法都是通过用手去剥的,这种方法剥出来的榛子仁虽然质量比较高但是生产率比较低,但我设计出来的这款剥壳机,榛子得主动剥壳可以得到实现,面且和人工用手剥壳相比,生产效率得到了大大提升。然而该产品与发达国家的榛子剥壳机相比,还是有很大的差距的,所以设计出新型的榛子剥壳机是比较迫切的事。
关键词:坚果破壳机,结构设计

Abstract
It is the ultimate purpose of our design to save the cost and improve the efficiency of the factory by replacing the manual shellerwith the shell breaker for the final purpose of reducing the heavyworkload of manual shell breaking and the trouble of high labor cost. Because of thevariety of nuts, here I choose hazelnut as the object of study. Developing the deep processing technology andwidening the utilization method of hazelnut is the mainway to improve thevalue of hazelnut commodity, and the precondition to solve this problem is to remove the shell of hazelnut. The design of hazelnut sheller is my audit topic. People used to peel the shell by hand. Although the quality of hazelnut peeled by this method is relatively high, but the productivity is relatively low. I designed this sheller, the hazelnut has to take the initiative shell can be achieved, and comparedwith manual shelling, the production efficiency has been greatly improved. However, comparedwith the hazelnut sheller in developed countries, there is still a big gap between the product and the hazelnut sheller, so it is urgent to design a new type of hazelnut sheller.
Keywords: nut sheller, structure desig

目录
摘要II
Abstract III
第1章绪论6
1.1课题研究的目的和意义6
1.2国内外研究现状6
1.3坚果主要产品工艺7
1.4传统坚果脱壳去衣技术9
1.5坚果的加工现状9
1.6研究内容14
第2章坚果破壳机总体参数的设计15
2.1坚果破壳机的工作原理15
2.2螺旋输送机设计参数的确定15
2.3螺旋输送机外形及尺寸20
2.4螺旋输送机外形长度组合及各节重量20
2.5电动机选型计算21
第3章带传动的计算24
3.1带传动设计24
3.2选择带型25
3.3确定带轮的基准直径并验证带速26
3.4确定中心距离、带的基准长度并验算小轮包角27
3.5确定带的根数z 28
3.6确定带轮的结构和尺寸28
3.7确定带的张紧装置29
3.8主轴结构图32
3.9主轴组件的验算32
3.9.1支承的简化32
3.9.2主轴的挠度33
3.9.3主轴倾角34
第4章键的选择与校核41
4.1带轮1上键的选择与校核41
4.1.1键的选择41
4.1.2键的校核41
4.2带轮2上键的选择与校核42
4.2.1键的选择43
4.2.2键的校核43
第5章Solidwork虚拟样机设计45
结论47
参考文献48
致谢49

A装配图

A装配图

带轮2

带轮2

吊座滑动轴承

吊座滑动轴承

端盖

端盖

法兰

法兰

进料口

进料口

设计目录

设计目录

设计所包含文件

设计所包含文件

输送部件图

输送部件图

摘要部分

摘要部分

字数统计

字数统计

带轮1

带轮1

申明:内容来自用户上传,著作权归原作者所有,如涉及侵权问题,请与我们联系,我们将及时处理!

评论及评价 如果您已下载,请选择星级评价并提交评论
立即下载 收藏 已收藏
作品编号:201823
文件大小:23.02MB
下载积分:4000
文件统计:doc文件1个,dwg文件8个,三维模型文件1个,zip文件2个