塑件三维外侧
充电器盒盖塑料注射模设计
摘要
根据充电器盒盖塑料制品的要求,了解塑件的用途,分析塑件的工艺性、尺寸精度等技术要求,考量塑件制件尺寸。本模具采用一模两腔,大水口搭底进料,注射机采用海天HTF300XB型号,设置冷却系统,CAD和UG绘制二维总装图和零件图,选择模具合理的加工方法。附上说明书,系统地运用简要的文字,简明的示意图和和计算等分析塑件,从而作出合理的注射模具设计。
关键字:充电器盒盖;一模两腔;注射机;海天HTF300XB;冷却系统;注射模具
Abstract
According to the requirements of the plastic products of the charger box cover, the use of the plastic parts is understood, the technical requirements of the plastic parts, such as the technological and dimensional precision are analyzed, and the size of the parts of the plastic parts is measured. This mold adopts the first mock exam two chamber, a bottom gate feeding, injection machine adopts the Haitian HTF300XB model, set cooling system, CAD and UG drawing two-dimensional assembly and parts drawing, choose the reasonable processing method of mould. A brief description, concise illustration and calculation are used to analyze the plastic parts, so that a reasonable injection mold design can be made.
Keywords: charger cover; the first mock exam two cavity; injection machine; the cooling system of injection mould; HTF300XB;
目录
摘要I
Abstract II
第一章绪论1
第二章注塑工艺分析及成型方法2
2.1充电器盒盖塑件分析2
2.1.1材料分析3
2.1.2塑件的结构及成型工艺分析3
2.2材料ABS的注射成型过程及工艺参数4
2.2.1注射成型过程4
2.2.2材料ABS的注塑成型参数4
2.2.3材料ABS性能5
第三章注塑模具结构设计7
3.1拟定模具结构设计7
3.1.1分型面位置的确定7
3.1.2确定型腔数量及排列方式8
3.1.3模具结构形式的确定8
3.1.4注射机型号的确定9
3.1.5注塑机的参数较核11
3.2浇注系统、关键零部件设计12
3.2.1浇注系统形式和浇口的设计12
3.2.2成型零件设计15
3.2.3排气系统的设计16
3.2.4温度调节系统设计17
3.2.5脱模机构的设计19
第四章总结24
4.1模具设计过程体会24
4.2设计存在问题及解决设想24
参考文献25
致谢26
A0注塑模装配图
塑件三维内侧
三维注塑模装配图
A3塑件图
A1底板
A1定模板
A1动模板
A1脚模
A1面板
A2底针板
A2面针板
A2型腔
A2型芯
A3滑块
设计目录
设计所包含文件
摘要部分
字数统计