刷新页面 加入收藏夹

瓶底零件加工方案制定与数控编程仿真含NX三维及CAD图+说明书

图片展示附件预览 2020-01-13 文件列表浏览 下载 收藏已收藏 报告错误 手机访问 [复制链接]

瓶底零件加工方案制定与数控编程仿真含NX三维及CAD图+说明书

三维零件

FTT2722零件加工方案制定与数控编程
摘要
数控机床加工工艺的编制比普通机床工艺规程编制相比,有其特殊。这是因为在普通机床的加工工艺中不必考虑的问题,如工序内工步的安排、对刀点、换刀点及走刀路线的确定等问题,在数控铣削加工时,这一切都无例外地都变成了固定的程序内容,正由于这个特点,促使对加工程序的正确性和合理性要求极高,工艺设计不能有丝毫的差错,否则加工不出合格的零件。
本文主要讲述FTT2722零件的三维造型和数控加工工艺编程,可乐瓶底的数控加工的重点和难点是复杂曲面的分析与加工,曲面加工相较于平面加工又困难很多。通过对零件图纸的分析,确定该零件的加工工艺、刀具、切削用量,制定出该零件的机械加工工艺过程卡片及数控加工工序卡,然后利用UG软件绘制出该零件的三维实体图,并运用UG软件对零件进行数控编程,最终进行模拟仿真,完成该零件的加工。
关键词:数控铣削;三维造型;加工工艺;切削用量;数控编程
ABSTRACT
The programming of NC machine tools is more complicated than that of general machine tools. This is because in the process of general machine tools do not consider the problem, such as the steps in the process of work arrangements, the knife point, change point and the tool path determination problem in NC milling, it all without exception into a fixed program content, precisely because of this characteristic for the processing procedures, the correctness and rationality of the highly demanding process design, there can be no mistake, otherwise the processing of qualified parts.
This paper focuses on the 3D modeling and NC machining process and programming the coke bottle bottom parts, through the analysis of the drawings, determine the cutting process, the cutting tool and the dosage, formulate the parts machining process card and NC machining process card, and then use UG software to draw the parts of the three-dimensional entity map, and the use of UG software for NC programming of parts, will eventually complete the program recording machine, the parts processing.
Key words: CNC milling; 3D modeling; processing technology; cutting; NC
programming
目录
摘要I
ABSTRACT II
1概论1
1.1简介1
1.2课题的任务及技术1
1.2.1课题的任务1
1.2.2技术2
1.3课题的目的及意义2
2FTT2722零件三维造型设计1
2.1UG软件的简介3
2.2三维实体造型3
3零件的工艺分析11
3.1零件几何要素的分析11
3.2尺寸精度的分析11
3.3形位精度分析12
3.4装夹方案分析12
3.5确定加工工艺方案12
3.4刀具的选择12
3.5切削用量的确定原则13
3.5.1主轴的转动速度的选择13
3.5.2进给速度的最后确定13
3.5.3背吃刀量的确定13
3.6选择加工机床14
4基于UG的数控模拟加工15
4.1CAM编程的一般步骤15
4.2建立几何毛坯和加工坐标系15
4.3后处理20
4.4NC程序的输出23
5总结31
参考文献33
致谢34

字数统计

字数统计

设计所包含文件

设计所包含文件

数控加工设定

数控加工设定

瓶底

瓶底

三维造型

三维造型

申明:内容来自用户上传,著作权归原作者所有,如涉及侵权问题,请与我们联系,我们将及时处理!

评论及评价 如果您已下载,请选择星级评价并提交评论
立即下载 收藏 已收藏
作品编号:150290
文件大小:65.8MB
下载积分:1000
文件统计:avi文件1个,doc文件5个,dwg文件1个,ppt文件1个,三维模型文件2个,zip文件1个