A塑件图
塑料套注塑模
摘要:本设计的题目为:塑料套注塑模的结构与设计。通过对该零件模具的设计,进一步加强了设计者注塑模设计的基础知识,为设计更复杂的注塑模具做好了铺垫和吸取了更深刻的经验。
本设计运用塑料成型工艺及模具设计的基础知识,首先分析了塑件的成分及性能要求,;然后利用UG软件计算了塑件的体积,便于选取注塑机;最后确定模具的设计参数、设计要点及推出装置的选龋
本塑件结构相对简单,考虑到塑件的结构特点、模具的制造成本和加工的方便性,本模具设计成凸模和凹模的形状完全相同。
关键词:注塑模、注塑机、凸模、凹模。
Injection molding of the plastic sleeve
Abstract:The text of design is Injection molding of the plastic sleeve.The designer’s foundation knowledge of the injection mould design is reinforced and is able to design more complexinjection mould through the design.
Through the foundation knowledge,firstly,the composion and the perfourmance of thr part is analyzed to choose the type of the gat advantagely.then thevolume of the part got out byUnigraphics CAD/CAM NX4 to choose the injection molding machine; Lastlythe character of the part is analyzed to determine the mould design parameter and design point and choose the ejection assembly.
The sturcture of the part is simple on thewhole,the core and the cavityof the mold should be designed to be the same to cut down the expense on the producting of them.
Keywords: Injection mould the injection-molding Machine core cavity
目录
第1章绪论1
1.1国内模具的现状与发展趋势1
1.1.1国内模具的现状1
1.1.2国内模具的发展趋势2
1.2国外模具的现状与发展趋势2
第2章概述4
2.1产品的工艺分析报告4
2.1.1材料4
2.2模具设计流程6
2.2.1注射模人工设计流程分析6
2.2.2注射模CAD流程7
2.2.3人手设计与CAD设计的比较8
第3章模具设计9
3.1模具简介9
3.1.1塑料模具的分类9
3.1.2模具的组成10
3.1.3注塑模具的生产过程11
3.2模具设计与参数计算11
3.2.1本塑件制品分析11
3.2.2注塑机的确定12
3.2.3注塑机参数校核13
3.3浇注系统设计、关键零部件设计14
3.3.1浇注系统的设计14
3.3.2分型面的选择17
3.3.3排气系统的设计18
3.3.4成型零件的设计18
3.3.5型腔的侧壁和底板厚度计算19
3.3.6导向零件的设计19
3.3.7脱模机构20
3.3.8、加热和冷却装置设计22
第4章模具装配图24
第5章结束语26
5.1存在的问题26
5.2问题解决设想26
5.2.1气泡问题的改进方法26
5.2.2浇口的选择和解决办法27
5.3.3小结27
致谢28
参考文献29
A注塑模装配图
导套
导柱
垫块
定模固定板
定模座板
定位环
动模板
动模座板
浇口套
拉料杆
内针
上模板
上模座
司筒
推板
推管
推管固定板
下模座
镶块
型芯
2摘要
3设计所包含文件
4目录
5动模固定板过程卡
6定模过程卡
A塑件图
1字数