铣平面夹具装配图
摘要
本篇说明书主要是对泵体零件的主要加工面与加工孔的步骤进行较详细的说明，例如在普通车床上采用一面两销的定位方式对此泵体的前端面和端面上的两孔进行加工。在减少成本和保证加工精度的基础上极大的保证泵体工艺规格的合理性。此次说明书的重点是对平面进行铣夹具进行加工，不仅减少了夹紧定位的时间提高了生产效率，还保证了加工的精度。由于泵体大多由中小型企业所生产，我也是根据这些提出了较为经济的设计方案。
关键词:泵体夹具工艺
Abstract
The instruction manual of this graduation thesis mainly describes in detail the main processing surface and hole processing steps of the pump body parts. For example, the positioning mode of one side and two pins is adopted on the ordinary lathe to process the front end face and two holes on the end face of the pump body. On the basis of reducing the cost and ensuring the machining accuracy, it greatly ensures the rationality of the process specification of the pump body. The focus of this manual is to process the plane milling fixture, which not only reduces the clamping and positioning time, improves the production efficiency, but also ensures the machining accuracy. Since most of the pump bodies are produced by small and medium-sized enterprises, I also put forward a more economical design scheme based on these.
Key words: pump body fixture process
目录
摘要I
Abstract II
1零件的分析1
1.1零件的功用分析1
1.2零件的工艺分析1
2确定毛坯画零件毛坯图2
2.1确定毛坯种类2
2.2确定毛坯尺寸及机械加工总余量2
2.3设计毛坯图3
2.4绘制毛坯图3
3选择加工方法，制定工艺路线4
3.1定位基准的选择4
3.2零件的表面加工方法4
3.3工序的集中与分散5
3.4工序顺序的安排5
3.4.1机械加工顺序5
3.4.2辅助工序5
3.5制定工艺路线6
3.7工序间加工余量、工序尺寸的确定9
3.8切削用量及基本时间的计算10
致谢14
泵体零件图
毛坯图
工序卡
设计所包含文件
过程卡
