后钢板弹簧吊耳零件图
摘要
本次设计是对后钢板弹簧吊耳零件的加工工艺规程及一些工序的专用夹具设计。后钢板弹簧吊零件的主要加工表面是平面及孔。由加工工艺原则可知，保证平面的加工精度要比保证孔的加工精度容易。所以本设计遵循先面后孔的原则。并将孔与平面的加工明确划分成粗加工和精加工阶段以保证加工精度。基准选择以后钢板弹簧吊耳大外圆端面作为粗基准，以后钢板弹簧吊耳大外圆端面与两个工艺孔作为精基准。主要加工工序安排是先以后钢板弹簧吊耳大外圆端面互为基准加工出端面，再以端面定位加工出工艺孔。在后续工序中除个别工序外均用端面和工艺孔定位加工其他孔与平面。整个加工过程均选用组合机床。
关键词后钢板弹簧吊耳，加工工艺，专用夹具
ABSTRACT
The design of the plate after spring lug parts of the processing order of the processes and some special fixture design. Spring plate after hanging parts of the main plane of the surface and pore. By the principle known Processing, the plane guarantee precision machining holes than guarantee the machining precision easy. So the design follows the surface after the first hole principle. Planewith holes and the processing clearly divided into roughing and finishing stages of processing to ensure accuracy. After selecting base plate spring lug large cylindrical face as a rough benchmark, After the leaf spring lug large cylindrical endwith two holes as a precision technology benchmarks. main processes arrangements after the first spring plate lug large cylindrical face each other benchmarks machined face, End position to further processing out of holes. In addition to the follow-up processes are individual processeswith end-positioning technology and other processing Kong and plane. The entire process of processing machine combinationswere selected.
Keywords The empress steel plate spring coil mourns the ear,Process the craft,Appropriation tongs
目录
摘要1
ABSTRACT II
1绪论1
2后钢板弹簧吊耳加工工艺规程设计3
2.1零件的分析3
2.1.1零件的作用3
2.1.2零件的工艺分析3
2.2工艺过程设计所应采取的相应措施4
2.3后钢板弹簧吊耳加工定位基准的选择4
2.3.1确定毛坯的制造形式4
2.3.2粗基准的选择4
2.3.3精基准的选择5
2.4工艺路线的制定5
2.4.1工艺方案一5
2.4.2工艺方案二5
2.4.3工艺方案的比较与分析6
2.5机械加工余量、工序尺寸及毛坯尺寸的确定6
2.6确定切削用量及基本工时（机动时间） 7
2.7时间定额计算及生产安排16
2.8本章小结18
3夹具设计19
3.1提出问题19
3.2夹具设计19
3.2.1定位基准的选择19
3.2.2切削力和夹紧力的计算19
3.2.3定位误差分析19
3.2.4夹具设计及操作的简要说明20
结论21
参考文献22
致谢23
夹具装配图
后钢板弹簧吊耳毛坯
夹具体
螺栓
毛坯图-版本2
钻模
2字数
3摘要
4设计所包含文件
5目录
6夹具设计部分
7过程卡
1工序卡
