工件三维图
摘要
数控技术是技术性极强的工作,尤其在机械加工领域应用最为广泛,所以这要求从业人员具有很高的机械加工工艺知识,数控编程知识和数控操作技能。此次的设计任务是对零件的加工工艺设计与程序编制及加工,利用绘图软件AutoCAD将零件的二维图画出来,然后用UG软件画出三维图形,再接着设计加工方案。方案的关键在于以生成最佳的刀具路径、利用最短的时间内加工出零件,且加工工序最优,加工出来的零件的工艺符合设计图纸的要求。根据这些要求选择最佳的加工工艺方案,填写工艺卡片,工序卡片。用软件编写加工程序,并且进行仿真验证得到加工效果图。
关键词:加工工艺;编程;加工
Abstract
Numerical control technology is a highly technicalwork, especially in the field of mechanical processing is the mostwidely used, so this requires practitioners to have machining process knowledge isvery high, CNC programming knowledge and skills. The design task is to the parts processing process design and programming and processing, the drawing software AutoCADwill be out of the picture parts in 2D, and then use UG software to draw the three-dimensional graphics, then several design schemes. The scheme is the key to generate the tool path, the best use of the shortest processing time of parts, and the processing procedure of optimal, processing out of the parts meet the requirements of design drawings. According to the requirements of processing scheme of the best choice, fill in the process cards, process cards. Using software to program the processing procedure, and carries on the simulationverification has been processing effect chart.
Keywords: processing technology; programming; processing
目录
摘要I
Abstract II
1绪论1
1.1本课题研究的背景1
1.2数控设备的简介1
1.3本研究的目的与意义1
1.4数控加工工艺与普通加工工艺的区别及特点2
2工艺性分析3
2.1零件介绍3
2.2零件加工工艺性分析4
2.3零件的技术要求分析4
3工艺规程设计5
3.1毛坯的选择5
3.2加工顺序的划分和加工工艺路线的确定5
3.2.1加工顺序的划分5
3.2.2加工工艺路线的确定6
3.3选择并确定工艺装备7
3.3.1数控机床的选择7
3.3.2夹具的选择8
3.3.3刀具的选择9
4工艺参数选择及工艺卡片的填写10
4.1刀具参数的选择10
4.2制定工艺文件13
4.3工序卡13
5基于UG的三维建模造型14
5.1进入页面14
5.2方块的造型操作14
5.3创建凹槽16
5.4创建长方形凸台17
5.5螺纹孔的造型操作18
6基于UG加工程序编制20
6.1数控编程的分类20
6.2数控编程20
6.3数控加工仿真27
6.3程序的后处理29
致谢37
参考文献38
零件图
刀具的选择
工序卡
过程卡
基于UG的三维建模造型
零件样图
设计计算预览
数控编程部分
数控加工仿真
字数统计