A0装配图
停车场升降电梯设计
PARKING ELEVATOR DESIGN
摘要
本次设计以立体升降横移式停车场作为主要研究对象，综合分析立体停车场的机构设计和传动系统两大要素。升降横移停车设备的形式多，既可单台使用，也可成套使用，拆卸方便对工作环境的依赖性低，可以有效解决住宅小区和公共区域泊车位紧缺的状况。
本文以三层三列7车位立体升降横移停车场作为主要此次设计的主要研究对象，对立体升降停车场的结构形式和传动系统进行详细的分析。该类车库根据功能的不同可以分为五大系统：骨架结构、传动系统、载车板单元、安全防护系统、控制系统。传动形式是本文研究的核心问题，其中升降传动更是传动机构的重中之重，升降牵引的主要形式有：链条传动和钢丝绳传动，因此，需要对传动形式的选择和校核进行研究。
关键词升降横移；传动系统；钢丝绳；载车板
Abstract
The design is based on a three-dimensional lifting and sliding parking lot as the main research object. This article comprehensively analyzes the two major elements of the mechanism design and transmission system of the parking lot. There are many forms of lifting and traversing parking equipment, which can be used on a single platform or in a complete set. The demolition facilitates low dependence on the working environment and can effectively solve the shortage of parking spaces in residential areas and public areas.
This paper takes the three-tier, three-row, seven-car parking space as the main research object of the main design. It analyzes the structure and transmission system of the three-dimensional lift parking lot. This kind of garage can be divided into five major systems according to different functions: skeleton structure, transmission system, vehicle-carriage unit, safety protection system, and control system. The transmission form is the core issue of this paper. Among them, the lifting transmission is the most important part of the transmission mechanism. The main forms of lifting traction are: chain transmission and wire rope transmission. Therefore, the selection and verification of the transmission form must be studied.
Keywords Lifting and traversing Transmission system Wire rope Vehicle board
目录
摘要I
Abstract II
第一章绪论1
1.1课题研究背景1
1.2立体停车场设备的分类及国内外现状1
1.2.1立体车库设备分类1
1.2.2立体车库国外现状3
1.2.3立体车库国内现状3
1.3课题研究内容及意义3
第二章总体结构设计5
2.1立体车库的运行过程5
2.2停车场工作原理方案设计5
2.3停车场的总体布局5
2.4停车场传动系统6
2.4.1升降传动系统6
2.4.2横移传动系统9
2.5骨架结构的选择和设计10
2.6载车板11
2.7车库电梯安全防护系统12
第三章主要参数计算14
3.1升降传动系统参数计算14
3.1.1主要性能参数14
3.1.2载车板质量的估算14
3.1.3升降电动机的选择15
3.1.4钢丝绳与滑轮的选取和设计15
3.1.5滚筒的设计与计算17
3.1.6传动比设计和减速器选取19
3.2水平横移传动系统参数计算20
3.2.1电动机的选取20
3.2.2横移导轮的设计和计算20
3.2.3传动比设计和减速器选取21
3.3轴承的校核22
3.4联轴器的选取24
3.4.1升降电动机减速器轴端处24
3.4.2横移电动机减速器轴端处24
3.4.3横移轴和传动轴轴端处25
3.5联接键的选取和计算25
3.5.1大齿轮和升降轴处25
3.5.2滚筒和连接盘处25
第四章机构经济性和环保性分析27
4.1经济性分析27
4.2环保性分析27
结论29
致谢30
参考文献31
字数统计
设计所包含文件
水平导轮-A2
升降大链轮-A2
下载车板部件图-A1
二层载车板部件图-A1
升降轴-A2
